Wide view of the Excell warehouse with slabs on A-frame racks and the glass mezzanine office.

Stone for Professionals in St. Petersburg, FL

Where the Builders Shop. Fabricators, builders, designers, architects, remodelers and cabinet shops choose stone at our St. Pete showroom, then take the slabs or have our team install them.

  • Slabs only, or slabs and installation
  • One showroom where you and your client see full slabs
  • Residential and commercial work across Tampa Bay

Request an estimate

Tell us about your project.

STEP 1 OF 3

Or call (727) 295-2206
Google108 five-star reviews on Google4.4 average from all 131 reviews, as of November 2026
Slabs only, or slabs and installation
See the whole slab before we cut
Showroom on 5th Ave S, St. Petersburg

Who We Work With on Stone Projects

The stone on the floor is the same for everyone. What changes from one professional to the next is who fabricates it and how the client gets involved.

Fabricators

Need a color you can't find? Buy just the slab and see the whole piece before you commit. Onyx, agate and the other exotic stones are sold slab-only as well.

Slabs only

Builders and contractors

Bring the plans for one house or a run of units. We go over the stone plan by plan, then template and install, or the slabs go to your own crew.

Designers and architects

Meet your client on the showroom floor and specify from full slabs instead of a sample board. For statement pieces, onyx can be lit from behind.

Exotic stone and onyx

Remodelers

Your client is keeping the cabinets and wants a new top. Choose the stone together here, and we template, fabricate and install it, taking out the old top if needed.

Kitchen countertops

Cabinet shops

Your customer needs a top for the boxes you build. Send them here to pick the slab, then decide who fabricates it: our team or a fabricator you already use.

Commercial projects

Stone for businesses: bar tops, counters and feature pieces. Each job is quoted on its own, so bring the drawings and we'll go over the stone with you.

See projects

Bring Your Client to See the Stone

A job goes easier when the client sees the stone before it's cut. Bring them to 1921 5th Avenue South and look at full slabs together, not a chip on a ring. You agree on the exact piece, and the layout is marked on it, so where the veining falls is settled before anyone cuts.

Designers and architects can settle the material before it goes into the drawings. Builders can pick one stone per plan. Remodelers and cabinet shops can get the homeowner's decision with the slab right in front of them.

  • Full slabs, seen in person
  • Layout marked on the stone
  • Residential and commercial jobs

Stone, cabinets, sinks and hardware, all in one place.

Full white stone slab with gray veining on a rack in the Excell warehouse.
Full slabs ready to view.

Slabs Only or Installed Who Does What

Slabs only, or slabs and installation? Same stone either way. This is how the work splits.

StepSlabs onlySlabs and installation
Choosing the stoneYou and your client pick the exact slab at our showroomSame visit, same slabs
TemplateYour fabricator measuresOur team measures on site
FabricationCut in your own shopCut by our team after your layout is taped on the stone
Old topYour crew takes it outWe remove it if needed
Installation and sinkYour crewOur team sets the stone and the sink, and seals natural stone
Plumbing and electricalNot part of our workNot part of our work either

On any installed job, crane and access are quoted per project.

How We Work With Professionals

Same showroom and same team, whether you take the slabs or we install them.

  1. Send the job

    Call (727) 295-2206 or send the request form with the project type, the city and the surfaces in stone. Say whether you want slabs only or installation, and bring drawings when you visit.

  2. Choose the slabs with your client

    Stock on the floor moves, so we walk it with you for the job in hand. Nothing is held until you settle it with our team, because a request sent through the website can't hold stone.

  3. Plan access early

    For condo and high-rise work, tell us the address, which level the stone goes to and how big the elevator is. When a slab won't fit in the elevator, it can go up by crane. Crane and access are quoted per project.

  4. Template and install

    If we install, we measure on site, lay out the cuts on the actual slab, fabricate the pieces and set the stone with the sink. Your plumber reconnects the water once the top is in.

Quartz or Natural Stone for the Job

On a building with many matching kitchens, the material decides how easy it is to make the last unit look like the first.

Quartz is engineered stone, so the look holds steady from slab to slab, and that is why rental owners and multi-unit builders often pick it. It contains resin: a trivet belongs under hot pans, and dark shades may fade where the sun hits them.

Granite is natural, with variation from one slab to the next, and it's a common pick for busy kitchens and rentals because it doesn't melt or blister and needs little care once sealed. When several units must match, choose those slabs together and look at them side by side.

For custom homes and design-led rooms, quartzite, marble and exotic stone give each space its own slab. Our guide to quartz vs. quartzite lays out the difference.

Granite-topped commercial bar with a fluted front, leather stools and a checkerboard floor.
Commercial bar in granite.

Bring Your Next Job to 5th Ave S

Stop by with your client and the plans, or send the job ahead with the form. Call before you come for a specific stone, because what's on the floor changes. Job outside St. Pete? Check the areas we serve.

For Professionals: Questions

Do you sell slabs to fabricators?

Yes. Fabricators buy just the slab here and cut it in their own shop. You see the full piece before you buy, and the exotic stones are sold the same way. Phone (727) 295-2206 ahead of a visit for a particular color, since inventory changes, and settle the slab with our team in person.

Can I bring my client to choose the stone?

Yes. Designers, architects, builders and remodelers bring clients to our showroom to see full slabs and agree on the exact piece. The layout is marked on the slab before cutting, so the client sees where the veining lands and which part of the stone faces the room.

Do you install for builders, or only sell slabs?

Both. Builders can take slabs only or have our team template, fabricate and install, including the sink and removing old tops if needed. Plumbing is not part of our work, and neither is electrical. On upper floors, a slab that won't fit in the elevator can go up by crane, quoted with the access for that building.

Do you take commercial projects?

Yes. Bar tops, counters and stone features for businesses are fabricated and installed by our team, and each one is priced on its own. Bring the drawings to our St. Pete showroom or describe the job on the form, choose Commercial project, and our team will contact you about your estimate.

Which areas do you work in?

Our one showroom is in St. Pete, and Tampa is just across the bridge. We serve the Tampa Bay area, including St. Petersburg, Tampa and Clearwater. Builders with several sites can list each city in the details box, and our team will let you know which ones we can reach.

Request a Project Estimate for Builders and Designers

Tell us the project type, the city and whether you need slabs only or installation. Our team will contact you about your estimate, and you're welcome to bring the plans to the showroom.

SERVING TAMPA BAY

SLABS ONLYSLABS + INSTALLATION

GRANITE · MARBLE · QUARTZITE · ONYX

(727) 295-2206

1921 5th Ave S, St. Petersburg, FL

See the whole slab before we cut.

Request an estimate

Tell us about your project.

STEP 1 OF 3

Or call (727) 295-2206