Side view of a waterfall stone island with cream and rust veining in an open kitchen with walnut floors.

Quartzite Countertops in St. Petersburg, FL

Quartzite is a natural stone with soft, flowing veins that may cross an entire slab. Choose yours in person on our showroom floor in St. Pete, then hand it to the fabricator you use or let our team cut and install it.

  • Natural stone, cut from a block, not made in a plant
  • Your layout taped on the slab before the first cut
  • Sealed when we install it, and resealed when it needs it

Request an estimate

Tell us about your project.

STEP 1 OF 3

Or call (727) 295-2206
Google108 five-star reviews on Google4.4 average from all 131 reviews, as of November 2026
Slabs only, or slabs and installation
See the whole slab before we cut
Showroom on 5th Ave S, St. Petersburg

What Makes Quartzite a Natural Stone

Quartzite starts out as sandstone. Over millions of years, heat and pressure deep underground fuse its grains into a dense, hard rock. Minerals that move through the stone along the way leave the veins and color bands you see once a slab is polished, which is why quartzite so often looks like marble from across the room.

The name is where people get mixed up. Quartz countertops are engineered, made in a plant from quartz and resin. Quartzite is cut from a block of stone that came out of the ground. If you are weighing the two, our quartz vs. quartzite guide puts them side by side with granite and marble.

At Excell, natural stone comes first. With quartzite, the veining is the whole reason to buy it, so we sell it by the full slab and tape your countertop pieces onto the stone before anyone picks up a saw.

  • Natural stone with marble-like movement
  • Every slab carries its own veining
  • Buy the slab alone, or have us install it
Kitchen island in stone with rust and teal veining under glass pendants, with white cabinets and a teal wall.
Veined stone island under glass pendants.

Quartzite Countertops: Upsides and Trade-Offs

What quartzite gives you, and what to plan for before you commit to a slab.

What quartzite does well

  • Each slab is one of a kind: the veins on your island exist on that piece of stone only.
  • It has the flowing look many people want from marble, in a harder stone.
  • True quartzite resists the acid etching that leaves dull spots on marble, which matters around lemons, wine and tomato sauce.
  • Large slabs carry long veins, a good match for waterfall islands and backsplashes cut from the same stone.

What to plan for

  • Natural stone needs sealing. We seal quartzite when we install it and can do it again once water stops beading up.
  • Not every stone sold under the name behaves like true quartzite. Judge the slab you pick, not the label on it.
  • Bold veining makes seam placement matter. On a long run or a big island, we plan where seams land with you.
  • A chip or a photo can steer you wrong, because the pattern shifts across the slab. Plan on seeing the full piece in person.

Quartzite is not only for kitchens. It also works on bathroom vanity tops, fireplace surrounds and bar tops, where a smaller piece of a slab you love can still carry the veining.

Is It Really Quartzite? Test the Slab

Stone names are trade names, and one word can cover very different rock. Some slabs sold as quartzite are the real thing. Others are softer and react to acid the way marble does. Both can look beautiful in a kitchen. They just ask for different care.

The reliable answer comes from the slab, not the tag. A few drops of lemon juice or vinegar left on an out-of-the-way spot show whether the stone etches, and true quartzite will scratch glass instead of being scratched by it. Before you test anything on a showroom slab, ask our team, and we can talk through what the results mean for your kitchen.

  • Check the slab you will actually buy
  • An etch looks dull and light, a stain looks dark
  • A softer stone can still work with the right habits
Close view of a full stone slab with flowing gray, brown and white veining on a rack in the Excell warehouse.
Check the full slab before you buy.

Installed by Our Team Across Tampa Bay

A few countertop jobs our crew has fabricated and installed. Captions give the city whenever we know it.

Waterfall island end in stone with bold gray, brown and white movement, in a St. Petersburg home.
St. Petersburg Waterfall island end.
Waterfall island in brown, gold and charcoal stone on a light plank floor.
Brown and gold waterfall island.
Waterfall island in white and brown stone with a copper faucet, in a white St. Petersburg kitchen.
St. Petersburg Waterfall island with a copper faucet.

Planning the Veins on a Quartzite Slab

With quartzite, where each cut lands changes how the finished countertop reads. This is how we work it out with you.

  1. Stand in front of the full slab

    Look at it from a few feet back, the way you will see it from the kitchen doorway, and again up close where you will work.

  2. Tape the layout on the stone

    Your countertop pieces are taped out on the slab itself. You see where the strongest vein crosses the island and what ends up behind the cooktop.

  3. Decide where the seams go

    Long runs and big islands can need a seam. We look for a spot where the pattern carries across it, or where it sits out of the main line of sight.

  4. Consider a waterfall or a book-match

    A waterfall end or two slabs opened like a book can turn the vein into the centerpiece of your kitchen countertops. Both use more stone, so we plan them before the template.

  5. Carry the stone up the wall

    A backsplash cut from the same slab keeps the veining continuous. Mention it early, because it changes how much stone the layout needs.

Four Steps to a Quartzite Countertop

The same order on every job, and you choose the stone before anything else happens. With quartzite, the template visit is also when we settle where the seams and the strongest part of the veining will sit.

  1. Choose your slab

    Pick the quartzite slab you want at our St. Pete showroom. What is on the floor changes, and a website request does not put a slab on hold.

  2. Template

    We measure your cabinets and walls on site and plan the cuts around the veining, the sink and the cooktop.

  3. Fabrication

    The layout goes onto the slab first. Then we cut the pieces, shape and polish the edges, and open the sink cutout.

  4. Installation

    We pull out any old top that needs to go, set the quartzite, put in the sink and seal the surface. Your plumber handles the hookups, since plumbing is outside what we do.

Crane lifts and building access are quoted per project.

Still Deciding? Compare Other Stones

Quartzite gets compared with marble for its look and with granite for everyday kitchens. If it is not the right fit for your project, one of these may be.

Natural stone

Granite

A wide color range, from almost white to nearly black, and a common pick for kitchens that get heavy use.

Granite countertops

Natural stone

Marble

Softer than quartzite and more prone to acid marks, with a patina that builds over the years.

Marble countertops

Engineered

Quartz

Quartz bound with resin for an even look from one slab to the next. It never needs sealing.

Quartz countertops

Statement stone

Exotic stone and onyx

Onyx, agate and bold quartzites for bars, vanities and walls, including stone lit from behind.

Exotic stone

Quartzite Countertops: Your Questions

Is quartzite the same as quartz?

No. Quartzite is natural stone cut from a block, formed when heat and pressure underground fused sandstone into hard rock. Quartz is engineered from quartz and resin, which keeps its look even from one slab to the next. They are sealed and cared for differently, so it pays to see both before you decide. Our quartz vs. quartzite guide compares them point by point.

Does quartzite need to be sealed?

Yes. It is natural stone, and we seal it as part of the installation. How long the seal lasts depends on the slab and on how hard your kitchen works. Sprinkle a little water on the counter: if it sits in beads, the seal is doing its job; if it darkens the stone, give us a call to reseal it.

Can quartzite etch like marble?

True quartzite resists acid much better than marble, so lemon or wine is far less likely to leave a dull spot. The catch is that some stones sold as quartzite are softer and do react. That is why we suggest checking the actual slab before you buy, and wiping up acidic spills promptly on any natural stone, whatever its name.

Can I buy a quartzite slab and use my own fabricator?

Yes. You can purchase just the slab and bring it to the fabricator you already use, or have our team handle the template, fabrication and installation. Choose the slab in person at our St. Petersburg showroom. Read how buying the slab alone works. Keep in mind that sending the form does not hold a slab, since what is on the floor changes.

Where can I see quartzite slabs near Tampa?

Our showroom is on 5th Ave S in St. Petersburg, just across the bridge from Tampa, and the slabs are on the floor to walk around and compare. We work across Tampa Bay, from St. Pete to Tampa and Clearwater. Put your city on the estimate form and our team will tell you whether we can reach you.

Request a Quartzite Countertop Estimate in St. Petersburg

Tell us which surfaces you want in quartzite and roughly how big they are. Our team will follow up about your estimate, and you are welcome to see the slabs first.

SERVING TAMPA BAY

SLABS ONLYSLABS + INSTALLATION

GRANITE · MARBLE · QUARTZITE · ONYX

(727) 295-2206

1921 5th Ave S, St. Petersburg, FL

See the whole slab before we cut.

Request an estimate

Tell us about your project.

STEP 1 OF 3

Or call (727) 295-2206